How to Reset the Photoconductor Page Count on a Lexmark E250d or E250dn Printer

1- With the printer powered on, open the front door / cover.
Lexmark E250.gif

2- Press and hold the cancel button (PATTLNK_4132007_1648-CancelButton_RedX_E250_en_US.gif ¬) until all the lights flash. This indicates that the photoconductor page count has been reset.

3- Release the button and close the front door/cover.

4- If this does not clear the PC Life Warningor Replace Photoconductormessage, power off the printer and attempt this procedure again from Step 1.

Leave a comment

Comments have to be approved before showing up